Epoxide Opening versus Silica Condensation during Sol–Gel Hybrid Biomaterial Synthesis

Hybrid organic–inorganic solids represent an important class of engineering materials, usually prepared by sol–gel processes by cross‐reaction between organic and inorganic precursors. The choice of the two components and control of the reaction conditions (especially pH value) allow the synthesis of hybrid materials with novel properties and functionalities. 3‐Glycidoxypropyltrimethoxysilane (GPTMS) is one of the most commonly used organic silanes for hybrid‐material fabrication. Herein, the reactivity of GPTMS in water at different pH values (pH 2–11) was deeply investigated for the first time by solution‐state multinuclear NMR spectroscopic and mass spectrometric analysis. The extent of the different and competing reactions that take place as a function of the pH value was elucidated. The NMR spectroscopic and mass spectrometric data clearly indicate that the pH value determines the kinetics of epoxide hydrolysis versus silicon condensation. Under slighly acidic conditions, the epoxy‐ring hydrolysis is kinetically more favourable than the formation of the silica network. In contrast, under basic conditions, silicon condensation is the main reaction that takes place. Full characterisation of the formed intermediates was carried out by using NMR spectroscopic and mass spectrometric analysis. These results indicate that strict control of the pH values allows tuning of the reactivity of the organic and inorganic moities, thus laying the foundations for the design and synthesis of sol–gel hybrid biomaterials with tuneable properties.     

A Raman technique applicable for the analysis of the working principle of promoters and inhibitors of gas hydrate formation

We report a Raman technique applicable for the in situ analysis of the development of hydrogen bonds in the liquid water‐rich phase just before the onset of gas hydrate formation. Herewith, the phase transition as well as the working principle of hydrate formation inhibitors and promoters can be analyzed. © 2015 The Authors. Journal of Raman Spectroscopy published by John Wiley & Sons Ltd.     

UiO-66 and hcp UiO-66 Catalysts Synthesized from Ionic Liquids as Linker Precursors

Using ionic liquids (ILs) as linker precursors, the well-known metal-organic framework (MOF) UiO-66 (Universitetet i Oslo) and the recently reported MOF hcp UiO-66 (hexagonal closed packed) have been successfully synthesized and characterized. The advantage of the applied novel synthesis approach is an economically and environmentally benign work-up procedure, due to the better solubility of the IL. Additionally, the reactivity of the terephthalate anions is increased compared to terephthalic acid, resulting in faster MOF formation with an increased amount of defects in the MOF structure. In order to explore to the influence of defects on the catalytic performance, the cyclisation of citronellal to isopulegol was employed as test reaction. The activity of hcp UiO-66 and fcc UiO-66 (face centered cubic) is improved compared to other MOF or zeolite based catalysts, while the selectivity is similar.     

Azobioisosteres of Curcumin with Pronounced Activity against Amyloid Aggregation,Intracellular Oxidative Stress,and Neuroinflammation

Many (poly-)phenolic natural products, for example, curcumin and taxifolin, have been studied for their activity against specific hallmarks of neurodegeneration, such as amyloid-β 42 (Aβ42) aggregation and neuroinflammation. Due to their drawbacks, arising from poor pharmacokinetics, rapid metabolism, and even instability in aqueous medium, the biological activity of azobenzene compounds carrying a pharmacophoric catechol group, which have been designed as bioisoteres of curcumin has been examined. Molecular simulations reveal the ability of these compounds to form a hydrophobic cluster with Aβ42, which adopts different folds, affecting the propensity to populate fibril-like conformations. Furthermore, the curcumin bioisosteres exceeded the parent compound in activity against Aβ42 aggregation inhibition, glutamate-induced intracellular oxidative stress in HT22 cells, and neuroinflammation in microglial BV-2 cells. The most active compound prevented apoptosis of HT22 cells at a concentration of 2.5 μm (83 % cell survival), whereas curcumin only showed very low protection at 10 μm (21 % cell survival).     

Incorporation of β-Alanine in Cu(II) ATCUN Peptide Complexes Increases ROS Levels,DNA Cleavage and Antiproliferative Activity**

Redox-active Cu(II) complexes are able to form reactive oxygen species (ROS) in the presence of oxygen and reducing agents. Recently, Faller et al. reported that ROS generation by Cu(II) ATCUN complexes is not as high as assumed for decades. High complex stability results in silencing of the Cu(II)/Cu(I) redox cycle and therefore leads to low ROS generation. In this work, we demonstrate that an exchange of the α-amino acid Gly with the β-amino acid β-Ala at position 2 (Gly2→β-Ala2) of the ATCUN motif reinstates ROS production (^•OH and H₂O₂). Potentiometry, cyclic voltammetry, EPR spectroscopy and DFT simulations were utilized to explain the increased ROS generation of these β-Ala2-containing ATCUN complexes. We also observed enhanced oxidative cleavage activity towards plasmid DNA for β-Ala2 compared to the Gly2 complexes. Modifications with positively charged Lys residues increased the DNA affinity through electrostatic interactions as determined by UV/VIS, fluorescence, and CD spectroscopy, and consequently led to a further increase in nuclease activity. A similar trend was observed regarding the cytotoxic activity of the complexes against several human cancer cell lines where β-Ala2 peptide complexes had lower IC₅₀ values compared to Gly2. The higher cytotoxicity could be attributed to an increased cellular uptake as determined by ICP-MS measurements.     

DFT analysis: Fe4 cluster and Fe(110) surface interaction studies with pyrrole,furan, thiophene,and selenophene molecules

DFT studies of both the Fe₄ cluster and the Fe(110) surface interaction with pyrrole, furan, thiophene, and selenophene showed that selenophene forms a stabler adsorbate iron complex than the other heterocyclic molecules; this is consistent with the binding energy data that were calculated between the Fe cluster and the Fe(110) surface with the heterocycles. Furthermore, when the adsorption of the compounds with the iron cluster was analyzed by molecular orbital studies, the orbitals of selenophene overlapped more strongly with the Fe atom than that of the other molecules. In TD-DFT, the π → π* peak observed for the molecules disappeared when they formed complexes, and there appeared a charge transfer band (ligand to metal), thus confirming the coordination of these molecules with the cluster. The data suggest that the chemisorption is an exothermic process.     

Spectroscopic and Computational Study of a Nonheme Iron Nitrosyl Center in a Biosynthetic Model of Nitric Oxide Reductase

A major barrier to understanding the mechanism of nitric oxide reductases (NORs) is the lack of a selective probe of NO binding to the nonheme Fe_B center. By replacing the heme in a biosynthetic model of NORs, which structurally and functionally mimics NORs, with isostructural ZnPP, the electronic structure and functional properties of the Fe_B nitrosyl complex was probed. This approach allowed observation of the first S=3/2 nonheme {FeNO}⁷ complex in a protein‐based model system of NOR. Detailed spectroscopic and computational studies show that the electronic state of the {FeNO}⁷ complex is best described as a high spin ferrous iron (S=2) antiferromagnetically coupled to an NO radical (S= 1/2) [Fe²⁺‐NO^.]. The radical nature of the Fe_B‐bound NO would facilitate N? N bond formation by radical coupling with the heme‐bound NO. This finding, therefore, supports the proposed trans mechanism of NO reduction by NORs.     

Enhancing the Water Splitting Efficiency of Sn‐Doped Hematite Nanoflakes by Flame Annealing

The effect of flame annealing on the water‐splitting properties of Sn decorated hematite (α‐Fe₂O₃) nanoflakes has been investigated. It is shown that flame annealing can yield a considerable enhancement in the maximum photocurrent under AM 1.5 (100 mW cm^?2) conditions compared to classic furnace annealing treatments. Optimizing the annealing time (10 s at 1000 °C) leads to a photocurrent of 1.1 mA cm^?2 at 1.23 V (vs. RHE) with a maximum value 1.6 mA cm^?2 at 1.6 V (vs. RHE) in 1 M KOH. The improvement in photocurrent can be attributed to the fast direct heating that maintains the nanoscale morphology, leads to optimized Sn decoration, and minimizes detrimental substrate effects.     

Physico-chemical and anatomical characterization of residual lignocellulosic fibers

Anatomical and physico-chemical properties of residual natural fibers (sugarcane bagasse, coconut fibers and peanut hulls) were characterized in order to evaluate their potential for use in the production of particleboard. The bulk density was determined by helium pycnometer and the chemical characteristics by using an electronic pH meter (for pH determination) on fibers dissolved in acidic and neutral detergents (to determine the levels of cellulose, hemicellulose and lignin). The anatomical characteristics were established using scanning electron microscopy coupled with an X-ray detector system, as well as energy dispersive X-ray spectroscopy. Results indicated similarities and differences between physico-chemical and anatomical characteristics of the residual lignocellulosic fibers when compared with the Pinus sp. wood commercially employed in particleboard production. Bulk density and pH for residual lignocellulosic fibers and Pinus sp. wood presented analogous values. Similar amounts of cellulose and lignin were identified between waste fibers and Pinus sp. wood. The presence of silica was identified in coconut fiber, peanut hull and sugarcane bagasse waste fibers, and may affect the mechanical characteristics of panels. Coconut and sugarcane bagasse fibers show surface pores with diameters ranging from 1.2 to 2.1 μm, below the 5 μm identified for Pinus sp. wood. Both fibers present pores distributed over their entire surface, whereas peanut hull fibers have no pores on their surface. This characteristic contributes to resin dispersion among particles, reflecting positively on the physical–mechanical properties of the panels. Particleboards produced with residual lignocellulosic fibers present similar physical–mechanical properties to those of Pinus sp. wood panels.